Exhaust sleeve is grill instead of smooth?


4 replies to this topic
  • xorron5

Posted October 05, 2008 - 06:35 AM

#1

Hi ,still havent got my new bike so i coud test my new DMC afterburner system ,,,,anyway what is wierd to me is that the exhaust pipe from inside is
not the way as normal smooth sleeve instead it has an like grill walls where u can see the packing from the holes...is that ok and normal in some pipes .
and i am not talking about the spark arrester end cone...i mean that if u remove the spark arrester then the actual tube has grill walls...:lame:

  • FLjoyride

Posted October 05, 2008 - 06:43 AM

#2

as far as I know, they are all like that.... the holes allow the sound (bouncing around inside the pipe like super balls) to enter the baffle material, thus muffling it.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • xorron5

Posted October 05, 2008 - 06:49 AM

#3

Ok thanks.... its my first aftermarket pipe and i just noticed that many other brands have the smooth wall sleeve...

  • grayracer513

Posted October 05, 2008 - 07:25 AM

#4

No they don't. The last 3-4 inches of the outlet may be smooth walled, but that's just the tail section, which is often curved to redirect the exhaust at the outlet. Your stock one was like that, too.

All of the MX four strokes and the after market race pipes are of the "glass pack" design. The muffler consists of a straight through tube, finely perforated along its length. A mat of fiberglass is then wrapped around the core tube, and the whole thing placed in a canister. In simple terms, the sound waves pass through the perforations and are absorbed by the fiberglass while the exhaust gas goes straight through. Mufflers of this type are usually limited in their ability to reduce sound, but typically offer more performance than quiter mufflers with mechanical baffling.

  • xorron5

Posted October 05, 2008 - 07:35 AM

#5

:eek: :lol: :bonk: thanks i am learning.:lame:





Related Content

Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.