my tps adjustment wont line up with screw holes!

No replies to this topic
  • bluebreadtruck

Posted October 02, 2008 - 05:47 PM


this is kinda strange. i went to set my tps and i found the end of the throttle linkage wasent even engageing the tps sensor. i added a peice of plastic and i was able to get the voltage to change as i moved the throttle. i got .1v all the way closed and 4.8v with the sensor all the way open at idle. now my issue, when i get the sensor to .62v where it should be at idle, it is 90 deg off from the screw holes! ***?


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.