Case guard

[TJ 755]

Case guard for 14T counter. Does Yamaha make one or is there an aftermarket one? 06 yz 4fit

Thanks!

[grayracer513]

The stock one should handle a 14. The 14T sprocket is larger at the radius by less than a quarter inch. They do make them in the aftermarket, too. Try Zip Ty Racing.

[Wiz636]

Hammerhead Designs also. http://www.hammerheaddesignsinc.com/

[WB450]

I have the Zip Ty, and I like it.

[WGP]

I run a 14T counter sprocket on a 06 with the stock case guard..no problem:thumbsup:

[Wiz636]

When I install a 14T I have to remove the case saver first and replace it once the sprocket is on.

[TJ 755]

So the zip ty one is plastic? Neither of them reference a larger sprocket.

I know it will work with the stocker but I went that route once on my 250F and the tight clearance mixed with some good old NW mud left a groove in the chain rollers. I'll figure something out. Thanks all.

[grayracer513]

So the zip ty one is plastic?

Yeah, it's plastic. Lots of things are plastic, like the springs in Corvettes, bullet proof vests,....

I see it as an advantage.