Cracked Sub-Frame



1 reply to this topic
  • baker01

Posted January 05, 2003 - 01:19 PM

#1

I have a 97 XR600R, the sub frame running from the swingarm up to the rear portion of the seat support has
a crack (chain side) running 3/4 of the way around it. The previous owner had passenger foot peg brackets welded on
and the crack starts at one of the welds. Does anybody have experience or suggestions on the best way to
repair this problem? Would re-welding it work? A replacement frame is not in the works at this time.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • qadsan

Posted January 05, 2003 - 03:17 PM

#2

A good welder can probably fix you right up and you'll be almost as good as new. Once its rewelded, it will be plenty strong again :)





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.