oil leak at frame

2 replies to this topic
  • crankmunya

Posted September 24, 2008 - 07:12 PM


I recently installed my engine, When I try to start it after about 5 or 6 kicks
oil is pouring out of the line where it connects to the frame. I drained the oil
and it is still leaking, it almost seems as if there is too much pressure if that is possible, any help would be greatly apreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Birdy426

Posted September 24, 2008 - 10:17 PM


Replace the O-Ring that goes between the fitting and the frame...

  • crankmunya

Posted September 25, 2008 - 07:11 AM


The oil is actually coming up past the hose clamp it is not coming out of the frame


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.