Valve lash?


6 replies to this topic
  • Mosow

Posted September 22, 2008 - 03:14 PM

#1

Going to adjust valves on 2001 WR 426 what does it need to be.

  • Mosow

Posted September 22, 2008 - 05:12 PM

#2

Anyone?

  • Alternative

Posted September 22, 2008 - 05:46 PM

#3

0.10-0.15mm Intake
0.20-0.25mm Exhaust

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Mosow

Posted September 22, 2008 - 06:47 PM

#4

0.10-0.15mm Intake
0.20-0.25mm Exhaust


Thanks man, gas, gas!

  • matt4x4

Posted September 23, 2008 - 05:33 AM

#5

Hey Mosow - sounds like you don't have a manual - go here:

http://www.yamahaown...ook.com.au/?r=0

  • Mosow

Posted September 23, 2008 - 06:12 AM

#6

Hey Mosow - sounds like you don't have a manual - go here:

http://www.yamahaown...ook.com.au/?r=0


You are the man, thanks brother! I looked every were to find this.

  • matt4x4

Posted September 23, 2008 - 10:19 AM

#7

Hey - no problem man - now if you can just send your wife's Gf up this way we'll be even!




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.