05 YZ 250. (clutch)


19 replies to this topic
  • zared

Posted September 21, 2008 - 01:08 PM

#1

Ok, so i put it in gear with the clutch in and try to roll it, HA...acts like the clutch is engaged, adjusted clutch @ lever, still nothing. i need manual for the bike does anybody have?

  • zared

Posted September 21, 2008 - 01:24 PM

#2

help:confused:

  • RTSinDallas

Posted September 21, 2008 - 01:43 PM

#3

What did you need to know?

  • zared

Posted September 21, 2008 - 01:54 PM

#4

why when I roll it with the clutch pulled in with the bike in gear act like the clutch isnt pulled in, for example when i push it, say's in first gear and i have the clutch pulled in, the bike doesnt wanna roll smoothly

  • zared

Posted September 21, 2008 - 03:13 PM

#5

:excuseme: :lol: :excuseme: :banana:

  • MJP68

Posted September 21, 2008 - 03:36 PM

#6

the clutch is dragging. make sure your freeplay is adjusted properly at the lever and the clutch and engine are warmed up. If there is still some drag you need to inspect the clutch.
if you are using a heavy weight fluid the clutch will drag when cold.

  • zared

Posted September 21, 2008 - 03:45 PM

#7

well i need the service manual know where i can get one

  • zared

Posted September 21, 2008 - 03:56 PM

#8

*Note, I adjusted Clutch Freeplay to specs, and still does it BAD...iunno man, shit.

  • RTSinDallas

Posted September 21, 2008 - 04:16 PM

#9

It should be the same as your 98. Might be warped plates or a groved basket. I would drain the oil and pull the the clutch cover and check things out. For the manual you can check at the dealership or online. Also, you may check out cyclepedia.com, they do online manuals. I used them for my KDX200, it was fine for my needs.

  • zared

Posted September 21, 2008 - 04:24 PM

#10

i wanna pull it off, but dont wanna replace the gaskest lol im so broke..

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RTSinDallas

Posted September 21, 2008 - 04:34 PM

#11

It has an o-ring.

  • zared

Posted September 21, 2008 - 05:05 PM

#12

oh forreal the clutch cover does?

  • ThumperKid250F

Posted September 21, 2008 - 05:24 PM

#13

yes it has a O ring for the clutch cover

  • zared

Posted September 21, 2008 - 05:33 PM

#14

badass

  • shrubitup

Posted September 21, 2008 - 08:40 PM

#15

badass

fo sho

  • hallsy

Posted September 22, 2008 - 05:58 PM

#16

See MJP68's post, cold clutch? If so, no roll in gear = normal.

  • zared

Posted September 22, 2008 - 06:14 PM

#17

thanks

  • Matt_W

Posted September 22, 2008 - 06:21 PM

#18

Even on a properly adjusted clutch with new components, there is still a bit of drag when you try to push the bike in gear with the clutch lever pulled in. My two smoker does it, and my brand new 08 YZ450F does it and I've only ridden it up the street and back so far. Unless it's a problem while the bike is being ridden (i.e. shifting or stalling), I wouldn't worry about it.

  • mxjosh

Posted September 22, 2008 - 08:43 PM

#19

PM me your email address for an 06 manual...everything but the front forks should be applicable to 05.

  • MJP68

Posted September 22, 2008 - 09:41 PM

#20

well i need the service manual know where i can get one


copy and paste.
this site has most 00-07 yamaha manuals for free download (pdf format)

download and save, print the pages you need or print the whole thing!!

http://www.yamaha-mo...ice/manuals.jsp





Related Content

Forums
Photo

93 yz 80 crank bearings out by Wheelierider3


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 2 replies
Forums
Photo

Everything for a beginner! by danieljames


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • 4 replies
Forums
Photo

Revalving a Factory Connection KYB SSS Revalve by C-P


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  73 replies
Forums
Photo

different year plastics by YJB006


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 2 replies
Forums
Photo

97 YZ250 suspension vs. 02 YZ250 suspension by Brendenob


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.