yz kick stand


12 replies to this topic
  • Nathaniel2010

Posted September 17, 2008 - 06:42 AM

#1

ok the yz does not have a kick stand obvious yes has any one atempted puting a wr stand on the yz? did it work out if no one has tried this i'll tell you how it went or if u have a better idea it would b much apreciated, reason for stand i'm 150 cm tall and ride a yz426 can you see where i'm coming from.

  • dyt

Posted September 17, 2008 - 08:27 AM

#2

there was a thread the other day some1 had a kickstand on a yz250

  • TJ 755

Posted September 17, 2008 - 08:28 AM

#3

trail tech or pro moto. I got the trail tech one it was $50 cheaper.

  • matt4x4

Posted September 17, 2008 - 10:19 AM

#4

Because of all the individual parts you have to purchase from yamaha, it adds up to a costly item, but yes - the mounting points are there because the bikes share the same frame so it bolts right up.

  • RJB

Posted September 18, 2008 - 03:39 AM

#5

trail tech or pro moto. I got the trail tech one it was $50 cheaper.


+1 on either of these. I went with the Pro Moto Billet ones on my YZ426 & YZ450. Never looked back and never notice the thing - other than when I need it. Prefer them to the stock one on my WR450

  • mazzuca21366

Posted September 18, 2008 - 06:44 AM

#6

Trail tec. It works great. Also makes it easier to start the bike with the kickstand.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • WB450

Posted September 18, 2008 - 07:09 AM

#7

PMB is hard to beat IMO.

Posted Image

  • tnl

Posted September 18, 2008 - 01:51 PM

#8

I have the trail tech one and it rubs on the swing arm after my first ride... I'd do the pmb if I was to do it again.

  • RJB

Posted September 19, 2008 - 05:03 AM

#9

One thing to check - from memory, the WR426 had an extra tab/bolt hole to fix the stock WR stand to. Not sure if you can simply mount it on the YZ. Here is the best pick I can find of the PMB one mounted on my YZ426

Posted Image

  • Wiz636

Posted September 19, 2008 - 07:32 AM

#10

PMB is hard to beat IMO.

Posted Image


+1. Quality construction, excellent fitment, and I never even know it's there when I'm riding.

  • DeeCee

Posted September 19, 2008 - 06:44 PM

#11

+1 for Trail Tech for me. Fitted great and no interference with the swing arm.

For trail riding a side stand is a definite must have accessory.

  • pbviking

Posted September 19, 2008 - 08:01 PM

#12

never had a problem with my trail tech

use on a 01 426 Glad i did not spend the extra 50 on pmb

  • Thrasherg

Posted September 25, 2008 - 12:41 PM

#13

Same results as Wiz, the PMB one fits perfectly, doesn't foul on anything and you wouldn't know it was there when riding.. Great if you ride with kids and need to stop a lot to help them.





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.