Handlebars YZ426F

4 replies to this topic
  • Guztav

Posted August 20, 2008 - 06:51 AM



On my 426 YZ is the handlebars a little bit to angled towards me. I would like a more straight bar. I hope you understand. What handlebar is a good update to my bike? I don't know if my handlebars is the original one, it's golden.

  • Guztav

Posted August 21, 2008 - 01:36 PM


So I guess all riders have the original handlebars...

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 21, 2008 - 01:50 PM


Stock YZ bars are not gold in color, so there's no indication that yours is not some other bend.

Go to the Pro Taper web site and look the chart over. The "sweep" is the amount the bars angle back at the ends. As you will see, the YZ High and the Factory Suzuki/KTM bends have the least pull back, and the Woods and CR bars have the most.

My personal favorite is the Windham/RM Mid bend. It's fairly straight, fairly high, and it puts your hands well forward, giving you a lot of room to move around in while standing.

  • Guztav

Posted August 22, 2008 - 04:23 AM


Great, thanks allot! Should I maybe take another higher bar or maybe bar raiser when I'm pretty tall. I am 1.96 metersm thats about 6.43 feet.

I feel with the bars I have now that it's pretty low when I'm standing up.

  • Guztav

Posted August 27, 2008 - 04:47 AM


I measured my bars rough and it's 770mm wide, 130mm back, and 90mm high. I think the windham mid that you recommended will be fine. Thanks for a good advice!

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.