400->450 clutch plate dimensions


No replies to this topic
  • Michael Moore

Posted August 15, 2008 - 07:08 PM

#1

Does anyone have a friction plate and a caliper with which to measure it falling readily to hand? I'm looking for the OD of the plate at the outside of the drive tab and the OD/ID of the friction material.

I've already pulled the clutch out of my YZF250 (5.425" tab, 4.768" friction OD, 4.145" friction ID) and I expect the 400->450 have a little bigger OD plates. If so, I'd like to find out the bigger bike's numbers within a reasonable accuracy.

I'm looking for donor plates to possibly build a new clutch for one of my vintage thumpers (definitely not a Yamaha).

thanks,
Michael





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Should I buy this bike? help....... by Numsa Hul


Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.