Axle block differences?


2 replies to this topic
  • stk0308

Posted August 12, 2008 - 09:31 AM

#1

I bought some second hand Supermoto Engineering axle sliders, the ones that replace the axle blocks, for my 2001 YZ426. The seller used them on an 06 WR450, and judging from everything I read they should work on my bike. When I tried to mount them they do not fit in the axle block gap. They are too small and can be turned about 1/8 a turn up and down. This won't do. So the question is, is there really a difference in that space from the '06 WR and my '01 YZ, or was he using parts intended for another bike? I'm guessing the latter.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 12, 2008 - 02:19 PM

#2

... is there really a difference in that space from the '06 WR and my '01 YZ,?

Yes, there definitely is.

  • stk0308

Posted August 13, 2008 - 10:11 AM

#3

Drat! So it's another case of assumption on the vendor sites that people are not considering motarding the 426s. When they saw "fits all YZ, WR, and YZF" they don't go back beyond about 2003. Ah, well. I'm getting used to it.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.