02 WR

1 reply to this topic
  • Puck

Posted June 08, 2002 - 05:50 AM


Just picked up my new ride. Been off bikes for 3 years but couldn't stay off.
The throttle mod I downloaded off this site by Mike Hobbs is for a 99 WR and recomends taking 8.5 Mm of the stop. Is this true for the 02 as well I need the straight info before I carve on the carb. Someone, former service manager, @ the shop I bought the bike from said about 3Mm. Big difference eh?
Nice bulletin board you have hear.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Fryboy

Posted June 08, 2002 - 06:16 AM


Hi Puck !

Picked a good bike to get back into sport with - I did too.

I took off the bolt and cut off nipple (with hack saw) down to were the threads start.

I have had no problems and only took 15 minutes to complete. ( did it while carb still installed )

Others have stated to remove entirely and/or get a YZ throttle stop.

Good luck!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.