Rear axel blocks on 08

3 replies to this topic
  • baymen12

Posted July 28, 2008 - 07:00 PM


The rear axel blocks are not the same size. Which one goes on which side?

  • grayracer513

Posted July 28, 2008 - 07:44 PM


One has an L shaped lip on one edge, that one goes on the sprocket side, and the L shaped lip goes forward. When using the marks to align the chain, count from the back edge of the block forward, or you'll be one full mark off.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • j-ripper

Posted July 29, 2008 - 01:29 PM


grayracer,,you rock!!! flat out, i was thinkin i had a bent swingarm cause when i used the notches, the bike rode crooked so i just used a tape from the axle to the swingarm bolt, never knew you had to read them back to front,,thanks

  • bigred455

Posted July 29, 2008 - 02:41 PM


Bet the bike was pulling to the right.If you count from front to back with the notches,the rear tire will favor pointing right.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.