bk mod

4 replies to this topic
  • keith_king

Posted June 04, 2002 - 01:16 AM


hey guys i need to do the BK mod, but i know if i do it im going to mess something up.. so is there anyone that lives anywhere near riverisde CA that is willing to help a guy out im willing to pay or just get a 12 pack and help out let me know thanks keith

  • Pozi

Posted June 04, 2002 - 04:25 AM



As long as you are confident with a drill, like most red blooded men, this mod is a breeze. And once you do this you'll feel more <font color=red>beta about doing other mods/additions. I did mine with the common fright of fawking the carb up but everything worked out just fine.

Do a search. There has been plenty of pictures posted to aid you in your process.

[ June 04, 2002: Message edited by: Pozi ]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • John_Lorenz

Posted June 04, 2002 - 04:29 AM


Just FYI on the drilling

Make sure you place a small steel stop between the exit wound and the plastic Thinga-Ma-bob.

The drill will break through and cut into the plastic thinga-ma-bob

a hack-saw blade works great

  • Sean_McCutcheon

Posted June 04, 2002 - 05:07 AM


Yeah I felt the same way about doing it. Thanks to Mike Carpenter's (mcarp) help I got mine done. Since then I have done two of my buddies carbs and actually it is pretty simple. As long as you have some drilling capability you will be fine.


Posted June 04, 2002 - 11:07 PM


Check out below.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.