fcr pilot jetin threads

4 replies to this topic
  • foxz

Posted July 24, 2008 - 01:58 PM


What size of threads is the pilot jet? The head broke off my jet and i had too drill a hole in it and back it out... any one know the size i want to run a tap down just to clean the threads incase i nicked them. thanks

  • foxz

Posted July 24, 2008 - 10:16 PM


is the pilet jet for idle? or low end?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • foxz

Posted July 24, 2008 - 10:24 PM


i had too drill out the jet cuz it broke off in the carb and i knicked the bottom left...towards the main jet...tinny bit..aynthing i should be worried about?

  • grayracer513

Posted July 25, 2008 - 05:49 AM


The pilot controls mixture from idle to round 1/8 throttle. If you nicked the end of the bore, it's nothing to concern yourself with.

  • foxz

Posted July 25, 2008 - 11:01 AM


fewf haha.. .thats what i wanted to hear.. thanks alot!

Related Content


Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.