pipe inbound, what about the jets

1 reply to this topic
  • michaeltrundle

Posted June 01, 2002 - 01:52 AM


hey guys
I am fitting a new bills muffler to my australian 2000 wr 400. I am bk modded, box lid off, and running a 160 mj,42 pj,obeln clip 3, 75 paj and 200 maj as recommended by the gurus around here. Cosidering the stock exhaust,it is going like the clappers to say the least, excellent throttle response and a wheelie monster, always starts 1st or 2nd kick.
Can anyone recommemd a good starting point with the jetting going from the athsmatic, stock boat anchor, muffler to a performance pipe.
Any guidance from taffy or jd would help heaps.
thanks in advance

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • S_Phillips

Posted June 03, 2002 - 10:31 AM



Read "Jetting Q s" but from the sounds of the performance of your bike it doesn't need any tinkering.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.