Sag settings with 24mm clamps?


1 reply to this topic
  • AZ Thumpdaddy

Posted July 12, 2008 - 05:09 AM

#1

I just bought an 07 (dealer leftover) and put 24mm Applied triple clamps on it with a Scotts. I am 225 lbs and ride the desert only. Would you still recommend 98mm sag per the mag article and do you have any recommendations on suspension clicker settings for the front and back. Thanks for your help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted July 12, 2008 - 07:20 AM

#2

I would still start there and then experiment to see what works best. The clamp offset affects trail, which changes how a bike turns in on corner entry, and how it tracks while turning. Sag and fork position change the head angle, which will affect how much the bike pushes. For desert stuff, you might prefer the forks down in the clamps and/or more sag.

Suspension clickers I would set at the stock positions and adjust from there. Read:
http://motoman393.th...suspension.html

Also extremely important is having the right spring rates. The suspension cannot work as designed without that, and you are a bit heavy for the stock stuff. Go to the Race Tech spring calculator and see what they recommend.





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.