2 replies to this topic
  • yzzzz426

Posted July 11, 2008 - 06:25 PM


alright i fouled a plug the other day so i fixed it, and while i was at it i changed the oil. now when i start the bike it clicks like its low on oil(that is what me car does i dont know about bikes but its the same clicking noise) and when ever i try to put it in first it pops the clutch if i put it in 2nd and let out the clutch works fine what the f did i do:eek:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • intensem1rider

Posted July 11, 2008 - 07:14 PM


Make sure you have the proper amount of oil in there, follow the procedure for checking it laid out in your manual.

  • drc02

Posted July 13, 2008 - 10:31 AM


remember when checking oil level check whil engine is not running. dont screw in dip stick. Also when running losen the top bolt at back of head on oil line for oil return to make sure you have oil pressure and flow to the head. you could also check all o rigs and filter for proper install.

Related Content


First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.