WR450 dualsport question.


4 replies to this topic
  • lhopster

Posted July 07, 2008 - 04:01 PM

#1

Wondering what gearing to use and chain?

Will dealers perform free mods on wr's

  • djv5

Posted July 08, 2008 - 06:46 AM

#2

Wondering what gearing to use and chain?

Will dealers perform free mods on wr's


What year WR? 2003-2006 came with 14/50 gearing

2007-2008 has 13/50 gearing. I run 15/50 for dual sporting my 2007WR, it helps keep the rev's down for 70mph cruising.

Where are you located in Indiana? I am in Michigan, and me be able to help with any of the free mods. Just sold my 2003 WR and bought a 2007 WR. Get a James Dean jet kit, Zipty fuel screw to dial in your jetting.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PBDBLUE

Posted July 08, 2008 - 07:00 AM

#3

Depends on what kind of riding you're going to do. If it's mostly dirt on the technical side I would leave it at stock. Seems to be a good compromise. If mostly asphalt and some dirt roads then go up a tooth on the front.

  • Thumper_Bloke

Posted July 08, 2008 - 12:11 PM

#4

Don't get the JD kit, just get the zipty fuel screw.

  • lhopster

Posted July 08, 2008 - 03:16 PM

#5

Maybe a little too far, southwest indiana.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.