lanston carb settings


2 replies to this topic
  • frankllynn

Posted July 03, 2008 - 06:32 AM

#1

i found this post in the archives. Anyone ever use these settings? Where can you find that needle? Its not in the parts finch.

YZ/WR400F 0 to 8000 Feet.

Needle: OBEKN on clip #3 from the top

Pilot: 38
Pilot Air Screw: 65

Alternate Pilot: 40
ALT PAS: 70

Main: 155
Main Air Jet: 160

Fuel Screw Initial Setting: 1/4 turn OUT

Additionally You will need to purchase an RC wheel Collar and attach it to the Fuel pump rod from normal rest position UP the width of a dime and tighten the collar. (TAFFY MOD)

Ride with caution because the bike will now rip your arms off.

http://www.thumperta...p/t-198788.html

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • frankllynn

Posted July 03, 2008 - 08:29 PM

#2

anyone????????????????

  • frankllynn

Posted July 03, 2008 - 08:30 PM

#3

what setting are you guys running on the yz 400. I ordered the collar for the taffy mod. Hope it works





Related Content

Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

1998 yz400f will not idle. by trolley


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  32 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.