Will the first WR450 owner/rider please check for

2 replies to this topic
  • GPS Dual Sport

Posted December 09, 2002 - 08:23 AM


To the first lucky bastard that has their hands on the WR450 could you please check the carb needle as you're performing the BK/GB mod and removing the throttle stop.
Is the new needle a multiple taper design or single taper.

And before you go riding weigh the new bike and then weigh your old WR426.

Then after the ride could you dyno test both bikes and post the results :) :D

Thanks for your support

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tigerowner_ut

Posted December 09, 2002 - 11:04 AM


I would like to see a sound test too. I ride enduros and don't want to get caught by suprise. If it is not too much trouble bring it over I would like a test ride.

  • Jim_Patterson

Posted December 10, 2002 - 03:16 AM


Hot on my list is:

If the throttle stop bolt replacement will be the YZ450f throttle stop bolt, or some special length.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.