Dead spot at 1/4 throttle


1 reply to this topic
  • harwood39

Posted June 20, 2008 - 10:04 AM

#1

I just replaced my stock stator with a yamaha brand bigger wr426 stator and flywheel on my 2000 yz426, because I have added tail and head lights and a horn. Now I have a dead spot at about 1/4 throttle. Does anyone have any suggestions or ideas on cause and remedy? I put in fresh gas after the install and replaced the plug.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • harwood39

Posted June 22, 2008 - 08:22 PM

#2

Nevermind guys its jetting. im gonna order the FMF jet kit and go from there... put a wide band behind her and throw her on the dyno... see what i can do.





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.