Wheel bearings

7 replies to this topic
  • hellboy

Posted June 15, 2008 - 04:32 AM


Can anyone tell me the ID and OD and width of the front wheel bearings and back wheel bearings.

thank for the info.

  • jamiehughes

Posted June 15, 2008 - 05:52 AM


on what???

  • hellboy

Posted June 15, 2008 - 03:05 PM


on what???

08 450

  • grayracer513

Posted June 15, 2008 - 06:04 PM


The bearing ID's are 20 and 22mm, but I don't know the OD's off the top of my head.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bg10459

Posted June 16, 2008 - 05:59 AM


Front - 6904-2RS - 20mm ID x 37mm OD x 9mm
Right Rear - 60/22-2RS - 22mm ID x 44mm OD x 12mm
Left Rear - 62/22-2RS - 22mm ID x 50mm OD x 14mm

I'm not certain these will fit the 08, but as long as nothing has changed since 06, they should.

  • grayracer513

Posted June 16, 2008 - 07:19 AM


... as long as nothing has changed since 06, ...

Nothing has.

  • hellboy

Posted June 16, 2008 - 03:19 PM


Thanks guys:applause:

  • yam 3

Posted June 17, 2008 - 07:52 AM


Go to a bearing house and get a sealed bearing for about $5...lasts much longer and is usually cheaper to boot. I know that the fronts are available but i doubt the rears are.

Related Content


Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.