Gytr basket and hinson inner hub


3 replies to this topic
  • ThumperKid250F

Posted June 14, 2008 - 01:58 PM

#1

hey guys could i use a gytr basket and a hinson inner hub.

i heard that Gytr makes hinsons parts or is it the other way around..

thanks guys 2006 yz 450

  • bustersat

Posted June 14, 2008 - 03:07 PM

#2

Not sure if this helps but I am using a Hinson basket with GYTR inner, pressure plate, and clutch set up for an '06 in a 02 444. Zero issues going on about 15 hours and two races.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 14, 2008 - 03:55 PM

#3

You can use any combination of parts you like along those lines. The baskets, hubs, and pressure plates are designed to replace the original parts.

  • skidooboy

Posted June 15, 2008 - 03:54 AM

#4

plus most of the gytr stuff is made by hinson so, you may be getting a complete one mfg package anyway. ski





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.