'06 footpeg mounts

2 replies to this topic
  • mike_dean

Posted May 30, 2008 - 04:03 PM


Has anybody been able to remove the footpeg mounts on an '06 YZ450, (I have some ProMoto Billet lowboy mounts I want to install) they have a very shallow torx head, and are very tight, have tried propane torch, I'll have to bring it to work to try the real torch to heat the loctite, if anybody has removed them, how? Mike

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MX926

Posted May 30, 2008 - 06:57 PM


Goodluck, those bad boys are on there solid.

  • todds924

Posted June 02, 2008 - 03:35 PM


I had to take one off my old 06 that was bent. I used a LOT of heat and a good Snap On Torx bit to get it off/with impact gun. replaced the bracket and ordered 2 new bolts.

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.