Axial Play in Waterpump Shaft

No replies to this topic
  • Birdy426

Posted May 19, 2008 - 10:31 PM


I'm trying to troubleshoot an overheating problem on my WR444. It has a Byesen Supercooler on it. I removed the waterpump housing to make sure everything in there was "per Hoyle", and noted that the shaft would rotate approximately 5-6 degrees within the slot on the balance gear, and that it has about .090" of axial float. Is this normal? I really don't remember what it was like when I took it apart last...


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.