YZ450 front rim on a WR450


3 replies to this topic
  • Doc200

Posted May 01, 2008 - 11:53 AM

#1

Anyone know a simple way to make a 2007 YZ450 front rim (no speedo drive) fit a 2007 WR450 (speedo drive)? Thanks.

  • 123BigcoopDawg576

Posted May 01, 2008 - 12:07 PM

#2

Anyone know a simple way to make a 2007 YZ450 front rim (no speedo drive) fit a 2007 WR450 (speedo drive)? Thanks.


you cant make the speedo work with a yz wheel...you can make the wheel work just fine with out the speedo and the yz spacers

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Doc200

Posted May 01, 2008 - 12:20 PM

#3

Thanks Dawg. I should have mentioned that I don't need the speedo to work on the WR. I'm trying to set up a set of rims for the ice and the hot set up seems to be a 19" rear with a stock front.

  • Frostbite

Posted May 01, 2008 - 12:26 PM

#4

you cant make the speedo work with a yz wheel...you can make the wheel work just fine with out the speedo and the yz spacers


I believe the only difference is the spacer on the speedo side. I think the WR spacer will work on the other side. I put an older YZ wheel on my 07WR, and just had to change the speedo side.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.