2008 YZ450F Spring Seats?


3 replies to this topic
  • DPW

Posted April 06, 2008 - 02:03 PM

#1

The only dumb question is the one not asked right??

Anyway I had a new rear spring(Race Tech) installed by a local shop and they did not reinstall the spring seats on the top or bottom of the shock. I reinstalled the shock and went to set the sag and when I turned the shock the top collar/adjuster did not turn and that is when I noticed the spring seats where missing. I guess my question before I call the shop on Tuesday is there any reason why not to reinstall the spring seats because I can not see a way to easily adjust the sag without them?

thanks

  • grayracer513

Posted April 06, 2008 - 02:17 PM

#2

I can't think of one. The 3 bikes I've installed springs on were all Race Tech springs, and the seats went right into place.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DPW

Posted April 06, 2008 - 02:52 PM

#3

thanks that is kind of what I thought. I just wanted some confirmation before heading back to the shop and making sure that there was not some reason to not install the seats...we already had one disagreement.


Without the seats you can not easily adjust the sag right? Other then using a hammer and punch and slowing turning the adjuster collar one cog at a time.

  • grayracer513

Posted April 06, 2008 - 03:36 PM

#4

Haven't tried it without the seats, but it seems like that would be the result.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.