08 WR Brake Light Switch


6 replies to this topic
  • 2lcf

Posted March 30, 2008 - 09:06 PM

#1

I know it has been posted here before, but I can't find it.........someone posted a link for a brake light switch for the WR's......please let me know what it was.......I want to make my brake light work, the FIRST step to getting it plated..........thanks

  • Birdy426

Posted March 30, 2008 - 10:00 PM

#2

Here's one...
http://cgi.ebay.com/...sspagenameZWDVW

Here's another...
http://shop.thumpert...t.asp?p=908&s=2

Your local shop can probably get one for you cheaper because you won't have to pay for shipping.

  • Eddie5150

Posted March 31, 2008 - 07:20 AM

#3

My '06 already had a dual filament bulb in it - with all of the wiring, too. I just wired the switch in with a power source to the Yellow wire, I think, yes, I just checked the manual. The connection is right under the seat. I wired the switch up through engine where the carb stuff is. It turned out to be one of the asier things that I have done, and it turned out great. I have just bought some speedbleeders to bleed the brake line. The funny thing is that it didn't seem to affect my brakes. But as this thread says:

http://www.thumperta...highlight=bleed

You should bleed your brakes.

Have fun.

eddie

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 2lcf

Posted April 01, 2008 - 08:33 PM

#4

Thanks for the replys............my next question is, does nayone know what thread pitch the banjo bolt is............10mm x 1.00 or 1.25

I think it is 1.25.............but no sure..........

:prof:

thanks..........................

  • CORider63

Posted April 01, 2008 - 09:22 PM

#5

Thanks for the replys............my next question is, does nayone know what thread pitch the banjo bolt is............10mm x 1.00 or 1.25

I think it is 1.25.............but no sure..........

:prof:

thanks..........................


10mm dia. x 1.25mm

  • 2lcf

Posted April 02, 2008 - 06:44 AM

#6

10mm dia. x 1.25mm


THANKS!!!!!!!!!!!:prof:

  • taycam

Posted April 09, 2008 - 05:43 PM

#7

I got mine from Baja Designs.....Nissin Brakes M10-1.25 both Front and rear brake are the same:thumbsup:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.