XR650L Oil Capacity Poll


99 replies to this topic

Poll: XR650L Oil Capacity (148 member(s) have cast votes)

XR650L Oil Capacity

  1. 2 qts. (23 votes [15.54%])

    Percentage of vote: 15.54%

  2. Voted 2.06 qts. (42 votes [28.38%])

    Percentage of vote: 28.38%

  3. Voted 2 1/4 qts. (25 votes [16.89%])

    Percentage of vote: 16.89%

  4. Voted 2 1/2 qts. (29 votes [19.59%])

    Percentage of vote: 19.59%

  5. Voted 2 3/4 qts. (17 votes [11.49%])

    Percentage of vote: 11.49%

  6. Voted 3 qts. or more (12 votes [8.11%])

    Percentage of vote: 8.11%

Vote Guests cannot vote
  • martinfan30

Posted March 30, 2008 - 09:37 AM

#1

As requested, I'm starting a capacity poll. There seems to be much debate on how to check the level, and how much should be in there.

The service manual states "2.06 qts. at oil filter change".

Vote for the quantity closest to what YOU beleive is correct.

Rich.

  • Old Dog

Posted March 30, 2008 - 11:07 AM

#2

3 Quarts (Liters in Canada), not a drop more. Actually I'd think anything between 2 3/4 to 3 quarts is good. :bonk: :prof: :confused:

  • martinfan30

Posted March 30, 2008 - 12:17 PM

#3

3 Quarts (Liters in Canada), not a drop more. Actually I'd think anything between 2 3/4 to 3 quarts is good. :confused: :prof: ;)


Am I missing something here? A quart is less than a liter. :bonk:

  • Old Dog

Posted March 30, 2008 - 01:28 PM

#4

Am I missing something here? A quart is less than a liter. :prof:


Nope, a Liter is less than a quart.

1 quart = = 0.95 liter

So, 3 Liters = 2.85 quarts :bonk:

  • Old Dog

Posted March 30, 2008 - 02:11 PM

#5

Maybe I didn't clarify it properly.

When we buy oil here in Canada, it comes in Liter jugs. When you buy it in the United States, you buy it in quart jugs. The "jugs" look very similar, and to the naked eye they look to be about the same size.

So, in Canada when I refer to a "quart", I actually mean a Liter. So when I say I put "3 quarts" in my bike, I actually mean 3 Liters, which when converted, is actually 2.85 quarts.

..... clear as mud eh? :prof: :bonk: :ride: :ride: :ride: :ride: :confused: ;)

  • Denn10

Posted March 30, 2008 - 08:02 PM

#6

i think alot matters in how you drain it, if your the type like me you drain it when the oils warm and you let it sit for 15mins while you run and do something else. I dont see the big debate here as this should really be a thread to show HOW TO CHECK YOUR OIL LEVEL as per the manual. If your doing that correctly then how much doesnt really matter. I dont see honda with a discrepency in manufacturing their dip sticks so use your stocker, NOT the temp gauge, and get it to the top of the hash marks per the manual. im sure someone will quote the manual soon as im too lazy to do that LOL

  • Old Dog

Posted March 30, 2008 - 08:24 PM

#7

Here are some facts....oh, wait not facts......


There is more oil in a Liter then a Quart!

33.8 fluid OZ in a Liter.

or

.946 Liters to a Quart or 946ml in a Quart


Right, which means there's 0.946 Liters in a quart.

0.946 ml isn't a Liter.

1000ml is a Liter, therefore 0.946ml is less than a quart.

What's so hard to understand about that? :prof:

32 OZ in a Quart. 1000ml in a Liter.

3 Liters would be 101.4 OZ or 3.169 Quarts! Not 2.85 quarts.

It does not matter if it is Liters or Quarts you have one to manny. 2 Liters is perfect at oil/filter change.


Wrong again.

2.83905884 liters are in 3 quarts

Don't believe me?

Check it here

Or if that's not good enough for you, try here

If that's not good enough for ya, you're beyond help.

  • Huffa 2

Posted March 30, 2008 - 10:35 PM

#8

Cool Martin, this should be really interesting :prof:

Next we'll have a poll on MPG's , see who get's the most and who has a gas hog.

  • Bibleman

Posted March 31, 2008 - 03:11 AM

#9

Hey guys, I'm hoping we don't get mad at each other over this. The poll already shows that most take more than the manual states. I think that was the main point of the poll to begin with - to prove there's some kind of real, not imagined, discrepancy. I doubt there's that many of us who don't know how to change and check our oil levels:prof: Maybe we should turn our attention to figuring out why it is that some bikes take more than others, if it's even that important at all. When I first posted about this topic, I mainly wanted to make sure I wasn't missing something obvious. Thanks to this poll, I now know I'm not:applause:

  • cleonard

Posted March 31, 2008 - 09:00 AM

#10

I have a couple of observations for changing oil on XR600's and XR650L's.

  • The Honda amount does not fill the bike to the top of the dip stick.
  • you can get a little more oil out by tipping the bike from side to side and other gyrations.
  • Measuring the oil on these bikes seems to be more art than science. for example the only way that I can get a repeatable reading is to ride the bike for at least a few miles. Idling just doesn't do it.

At a point right near the top of the dipstick the oil will drain down the tube to the head. The dip stick will never show more than height of that tube.

Contrary to what some here might believe, some oil is sold in liter containers here in the states.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • martinfan30

Posted March 31, 2008 - 09:03 AM

#11

I have a couple of observations for changing oil on XR600's and XR650L's.

  • The Honda amount does not fill the bike to the top of the dip stick.
  • you can get a little more oil out by tipping the bike from side to side and other gyrations.
    [color=red]
  • Measuring the oil on these bikes seems to be more art than science. for example the only way that I can get a repeatable reading is to ride the bike for at least a few miles. Idling just doesn't do it.[/color]



Very important point.


Although I am starting to lean toward 2 1/2 qts. myself.

  • cleonard

Posted March 31, 2008 - 09:08 AM

#12

I don't shoot for the very top of the dip stick markings. I try to be about 1/2 to 1 inch from the top. That leaves a little extra room for a poor reading. If I measure more than one inch it's time for some oil.

When I change my oil I drain and refill. I get it to about the middle of the dip stick. That takes just about what the manual says. I then take it for a quick couple of mile spin around the neighborhood and top it off.

  • Denn10

Posted March 31, 2008 - 10:14 AM

#13

when i said something about measuing with the dipstick to the top i meant to the top of the hash marks, which is not the top of the dipstick for sure. only what is meant to be full.

  • Denn10

Posted March 31, 2008 - 10:31 AM

#14

HERE this should stop the arguing about what is what.......http://wiki.answers....e_in_one_gallon

i dont know the difference between a US and UK gallon but i guess thats what the difference is. Here in US we do it our own way baby!!

im drinking my water here (costco) 1.0 litre and it says right on it and i quote..."1 quart 1.8 fl oz (1.0 litre)" so 1 litre would = 33.8 fluid oz. SO i find an online calculator and put in 33.8 oz and it says it is one litre, FLUID OZ that is so lets forget the differenece in US vs other calculations and go on with it.......CHECK IT ON THE DIPSTICK!!!!

http://www.convertun...unces/to/litres

  • jbird710

Posted March 31, 2008 - 10:53 AM

#15

I don't ride my 650L much and changed the oil (along with the filter) for the 3rd time last weekend. I looked up in the manual (Honda) and it said the capacity is 2 quarts. After putting 2 quarts in, rode around the block, and checked it, the oil was at the very bottom of the dip stick. It took another 1/2 quart to get it up to the middle of the dip stick.

  • hondaxrl650

Posted March 31, 2008 - 10:59 AM

#16

I go with 3 do to alot of hw driving 85 miles round trip a little more oil in there makes me feel good ..

  • Denn10

Posted March 31, 2008 - 01:05 PM

#17

Old Dog
Lay off the bong tokes before you start posting about unit conversions:crazy:


how bout you all stop with the bashing, if you aint got nothing to contribute then dont try and stir the pot doofus????:prof: !!!!

  • Old Dog

Posted March 31, 2008 - 01:07 PM

#18

Old Dog
Lay off the bong tokes before you start posting about unit conversions:crazy:


I will if you will. :bonk:

My bad, I converted the wrong way.;)

I guess that gives you and BWB63 the right to be complete dicks in response. :confused: :prof: :ride:

  • martinfan30

Posted March 31, 2008 - 01:09 PM

#19

Easy....

  • Denn10

Posted March 31, 2008 - 01:20 PM

#20

someone gonna lay the SMACK DOWN!!!!!
Posted Image

LOL i love adding pics its so fun!!!!!





Related Content

Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.