426 cam sprockets marks wrong?


2 replies to this topic
  • netzzwerg

Posted March 25, 2008 - 11:13 AM

#1

Helo,

i just wanted to reassamble my WR426 Motor, but I noticed, that maybe the marks on the cam sprockets are wrong. I put the cams into the right position but as you can see on the picture the exhaust cam is directed a bit upward. Is this right? If not, how far can i turn the Cam clockwise to get a good timing? Maybe the one of the YZ ?

Regards
thanks

marks on the cam sprockets dircted wright:
http://www.manfredke...25032008251.jpg

but cams directed wrong:
http://www.manfredke...25032008256.jpg

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Reedus

Posted March 29, 2008 - 06:37 AM

#2

I may be wrong, but your INTAKE looks like it is off by one tooth and pointing slighty up. Rotate that sucker one tooth clockwise and then it should be right. That will give you 13 pins between marks which is what you should have on the wr.

  • Math

Posted March 29, 2008 - 12:33 PM

#3

Per what I see on the First picture, you are YZ timed.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.