680 compression


3 replies to this topic
  • dylanr

Posted March 22, 2008 - 05:17 PM

#1

Just wondering what i should be getting for compression on a 650r with a 102.4 mm 10:1 compression wiseco, with nikasil cylinder? After my rebuild, i am paranoid about everything.

thanks

  • dylanr

Posted April 03, 2008 - 06:13 AM

#2

bump. anyone?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RyanWilliamCantrell

Posted April 03, 2008 - 07:58 AM

#3

102.4 mm 10:1 compression wiseco, with nikasil cylinder? After my rebuild, i am paranoid about everything.

thanks


That's basically what I'm getting ready to do with mine ~ I'll be pulling it apart in a week or so. :prof: Ask Mike Powell, as BWB63 says that what he's done.

  • HeadTrauma

Posted April 03, 2008 - 09:21 AM

#4

Has it been run and broken in yet? If not, the compression will probably read slightly low.

Under absolutely ideal conditions the maximum pressure you could see is something like 173psi(calculated). Since nothing is ever ideal and the cam timing events come into play, I would be looking for a pressure in the high 150s to mid 160s. Sorry I can't contribute actual measurements from an engine.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.