going nutz!!


6 replies to this topic
  • Traskrider

Posted March 20, 2008 - 08:07 PM

#1

The choice for exhaust is making me nuts ! i'm looking for low end and mid range on my 07 WR450 tight trail and hillclimbs 1st and 2nd gear stuff i dont ride wide open enough to worry about top end any advice ? I've searched forums but cant get much from em. alot great stuff but not quite what i'm looking fer just yet,

  • Jim813

Posted March 20, 2008 - 08:11 PM

#2

LIke i've said to everyone, the guy who rides yamahas for a lving will know the weak points best. Do yourself a favor and give Doug a call 877 - DUBACH1
(382-2241)

  • clark4131

Posted March 20, 2008 - 10:10 PM

#3

Any quality aftermarket exhaust is going to improve things across the rev range. If you really want to make a difference down low, change your gearing...SC

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RAZ227

Posted March 21, 2008 - 09:18 PM

#4

The choice for exhaust is making me nuts ! i'm looking for low end and mid range on my 07 WR450 tight trail and hillclimbs 1st and 2nd gear stuff i dont ride wide open enough to worry about top end any advice ? I've searched forums but cant get much from em. alot great stuff but not quite what i'm looking fer just yet,


I have a 07 WR 450 and put on the FMF Powercore TI. It's an awesome pipe with great sound and perfomance. Give it a shot:thumbsup:

  • Just_a_trail_rider

Posted March 22, 2008 - 08:20 AM

#5

I've never thought that my wr450 was lacking power that a slight twist of the wrist couldn't solve. I have both a stock pipe and an fmf factory 4. The aftermarket is a little better, but it doesn't really help me climb hills.

What helped me there was to change me gearing from 14/50 to 13/48. It now crawls very nicely up hills so long as I stay on the gas. I think that the 07 is geared differently than the 05's

Just an opinion.

  • Team_Oatmeal_Pie

Posted March 22, 2008 - 05:15 PM

#6

For Trask and TSF I would grab 2 more teeth in the rear before I worried about a pipe. But if you want a pipe I would find one with several end caps so you can tune it power and sound wise to your desired set up.
Dr. D is supposed to be one of the best. I personally run a PC 496 and have tried both the short and long White Bros E-series with all sorts of disk combinations (never really liked it) the Pro Circuit is ok, mainly its just lighter then stock. Stock is hard to beat when its uncorked but then its way too loud. I have both the Pro Moto billet end cap and GYTR end cap and must say the Yamaha GYTR is better and it only costs $45 bucks to pass sound.

  • mmm0042

Posted March 22, 2008 - 07:21 PM

#7

I second (third, whatever) the motion on changing sprokets. I went down to a 13 up front and she crawls really good in the tight stuff.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.