Looking For A Gen 1 Baja Design Handlebar Switch


6 replies to this topic
  • FASTANDLOWAVENGER

Posted March 18, 2008 - 10:32 AM

#1

I Am Looking For A Gen 1 Baja Designs Handlebar Switch To Repair/replace The One On Mine That Has A Broken Lever.it Does Not Need To Work But Does Need To Have The Slide Piece For The High/low Beam And Running Light In Good Working Order.i Will Pay For The Whole Unit So I Can Get The Lever. Thanks

  • abby

Posted March 18, 2008 - 10:42 AM

#2

I lost the switch cover on the newer style switch, and called Baja Designs and they pulled just the cover from one they had setting around.

Might be worth a shot if you can't find one elsewhere.

  • FASTANDLOWAVENGER

Posted March 18, 2008 - 10:55 AM

#3

Tried That Already Seems That This Switch Is Prehistoric.i Might End Up Rigging Something Up And I Can't Find One.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • abby

Posted March 18, 2008 - 11:05 AM

#4

K&S (http://www.kandstech.com/) uses the same switch assemblies (maybe they make them, I am not sure).

But maybe they still have the old style.....

  • FASTANDLOWAVENGER

Posted March 18, 2008 - 11:06 AM

#5

WHAT WILL IT TAKE FOR THIS TO WORK?https://www.bajadesi...category=MCYCLE
I DON'T WANT TO HAVE TO REWIRE THE WHOLE BIKE?

  • FASTANDLOWAVENGER

Posted March 18, 2008 - 12:49 PM

#6

Found One!!! Thanks Everybody Who Helped.

  • Sundog

Posted March 18, 2008 - 12:57 PM

#7

Which one and where did you find it?

Link??





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.