Slow Jet on 650L


1 reply to this topic
  • DownEast75

Posted March 17, 2008 - 03:30 PM

#1

Hey guys, I got my new jets in the mail today, and plan on putting them in tonight. My question is on the carb where the slow jet goes, when I first pulled the carb, the slow jet was screwed completely in the hole, you had too look doen in the hole to see it, In the pictures for Dave's Carb Mods, the pic that shows the jets, I can clearly see his slow jet at the top of the hole. Do I completly screw down and seat the slow jet in its hole, or do I just screw it in until the top is flush to the top of the hole as in the pics in daves mods.

THANKS, John

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Kenzo

Posted March 17, 2008 - 05:00 PM

#2

...all the way down "gudentite" unless you have the taller style pilot jet and then u'll need to trim the "slosh bucket"...but u still want it tight...just make sure u use the correct size screwdriver or u'll bugger it up.

i just installed the 58 pilot and it wus to big when i checked the fuel screw...gunna put the 55 pilot in asap.

:confused:





Related Content

Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 8 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.