2002 wr426 won't idle


2 replies to this topic
  • ktmlane

Posted March 03, 2008 - 07:20 AM

#1

the motor is getting to where it won't idle correctly. Is there a part number for the jet ket and can any one tell me if this bike has the gray wire I need to disconnect? I did the throttle stop fix when new.also put a white bros pipe on it .
thanks for any info.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • matt4x4

Posted March 03, 2008 - 08:07 AM

#2

Has it been stored for a bit recently?
Sounds like your pilot circuit may be clogged.
First thing I'd do is clean out the entire carb if you're pretty sure it isn't valves or rings.

  • William1

Posted March 03, 2008 - 11:51 AM

#3

Sounds to me like the valves are tightening up. Check the clearances.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.