Clutch Compatibility 06 with 07/08


2 replies to this topic
  • akonibai

Posted February 27, 2008 - 06:04 PM

#1

Guys have you tried replacing the clutch kits of an 06 to 07/08 since the newer models have only 8friction and 7plates? do yo need to replace the BOSS, CLUTCH and PLATE, PRESSURE 1 .

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted February 27, 2008 - 06:42 PM

#2

The boss is the same in all three, but the '07/8 pressure plate is different because of the plate count, and so are the springs. The plain plates are also different, but you'd need to check the manuals to see if the thickness was different or not.

  • akonibai

Posted February 27, 2008 - 08:16 PM

#3

yes the on the 07/08 are thick, i'll just try to use this on my 06 and hopes nothing bad will happen.





Related Content

Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.