9 replies to this topic

Posted February 22, 2008 - 01:43 PM


Just got the frame back from the powder coaters... now I hope I remember where everything goes.
Posted Image

  • martinfan30

Posted February 22, 2008 - 01:58 PM


Looks good. I know you are in ENG., but what about did that cost?

  • butcharin

Posted February 22, 2008 - 03:42 PM


Looks good. Hope to be powder coating my fame soon.:smirk:

  • husky123

Posted February 22, 2008 - 06:18 PM


The motor goes somewhere in the middle.:smirk:

Looks good!

  • Krannie McKranface

Posted February 23, 2008 - 01:22 AM


Pretty, but, it' made of mild steel!!! Aaargh!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted February 23, 2008 - 05:54 AM


The frame was powder coated free of charge.
My wife is a buyer for a filtration company so when she sent her companies filter parts away for powder coating, somehow my frame got mixed up with them. Hmmm can't think how that could have happened


Posted February 23, 2008 - 05:54 AM


thanks for the tip Husky

  • jetfuel

Posted February 23, 2008 - 06:50 AM


Looks good. Post some pics when its back together:thumbsup:

  • xrltim

Posted February 24, 2008 - 04:39 PM


I know in SoCal you can get a frame powdercoated for about $100. I've had several bicycles and a few moto frames done.


Posted February 27, 2008 - 01:00 PM


The frame had to be shot blasted quite a bit first as the previous owner had decided to hand paint the bike in black hammerite. I plugged the oil holes with a film of grease then bunged them up with silicon and then finaly taped all round the thread with masking tape. When I got it back the taped peeled off easy and the silicon pulled out in a complete plug. I can't see anyway that any bits got in there during the process but just to be sure I will run some oil though it a few times

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.