Air mixture screw?



1 reply to this topic
  • BlueDragon

Posted October 26, 2002 - 05:08 AM

#1

Hey Thumpers, I have an 02 wr426 and ride from 9-12000'. I just changed my jetting to a 38pj/158mj/ekq#3 and stock air jets. Have done the bk mod and acv mod. Was wondering how to adjust the air screw. Its at about 2 1/2 turns out right now but dont know where it should be or what to look/listen for for proper set up. Could someone help me out. Thanks TT

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MN_Kevin

Posted October 26, 2002 - 05:23 AM

#2

first off, it's a fuel screw. The more turns out, the more fuel.

If you chop the throttle, and the revs hang up, too lean.

The old method was if backfiring on decel, too lean.

If you are 2.5 turns out, and it's too lean, go up on your pilot.

To play w/ it, start out at 1/2 turn and try it out, to feel what happens, and continue to go out 1/2 turn testing it each time. You may be able to decide, by feel, what is really going on.

TRIAL & ERROR.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.