07 YZ450F Head Pipe V/S 06

2 replies to this topic
  • jsgriffey1

Posted February 17, 2008 - 01:25 PM


I purchased a FMF slip-on for my 06 450F that came off a 07. I was under the impression that the 06 and 07 where the same bike. When I mounted the pipe the silencer bolt hole did not line up which was no problem I just made a bracket but the mid pipe ID is much larger than the head pipe OD. Am I missing some type of gasket to compensate for the almost 2.5mm gap between the mid and head pipe?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • KJ790

Posted February 17, 2008 - 02:48 PM


The mounting holes should be the same but the diameters headers were different so the midpipe on an 07 slip on will not fit on an 06. FMF slip ons come with a spacers to insert if you have an 06. Call FMF and see if you can get one.

  • jsgriffey1

Posted February 17, 2008 - 04:43 PM



Related Content


Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.