Where does one hook up ones oil cooler lines?


27 replies to this topic
  • ToXicD

Posted February 18, 2008 - 05:03 PM

#21

It would be over kill but you could do it. The steel braided hose is the same as the oil line hose they just use different high pressure fittings.

  • vegasheat

Posted March 13, 2008 - 11:58 AM

#22

Here is my oil cooler project, Jag 3110 cooler and home made stone guard, overall it dropped the temps 10-15 Deg

Posted Image

  • martinfan30

Posted March 13, 2008 - 12:10 PM

#23

Here is my oil cooler project, Jag 3110 cooler and home made stone guard, overall it dropped the temps 10-15 Deg

Posted Image


I like that alot. I saw your post over "there".

Wlecome to TT!

  • vegasheat

Posted March 13, 2008 - 12:28 PM

#24

I still need to get some pics for ya on the oil line.

I like that alot. I saw your post over "there".

Wlecome to TT!



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • martinfan30

Posted March 13, 2008 - 12:46 PM

#25

I still need to get some pics for ya on the oil line.


Yeah, I want to see the hook up. Thats a JAGG cooler, is it a universal unit?

  • vegasheat

Posted March 13, 2008 - 12:53 PM

#26

Yeah, I want to see the hook up. Thats a JAGG cooler, is it a universal unit?

I called Jagg and they said to use there #3110 cooler as a fit as they do not sell the kit for the "L" anymore, they also faxed me the old instructions to the kit and it showed where to cut into the oil lines.

Found the cooler on ebay a lot cheaper then Jagg

  • martinfan30

Posted March 13, 2008 - 01:10 PM

#27

I called Jagg and they said to use there #3110 cooler as a fit as they do not sell the kit for the "L" anymore, they also faxed me the old instructions to the kit and it showed where to cut into the oil lines.

Found the cooler on ebay a lot cheaper then Jagg


Great info! TY.. One day when you get time, could you scan and post those directions?

Thanks ,

Rich

  • vegasheat

Posted March 13, 2008 - 08:01 PM

#28

Ok, here it is, the one thing I changed was I did not cut the flexible line as indicated in (fig2) I went to the hard pipe and made the cut, it is tight and you have to be creative in the hose routing but it's doable

Posted Image





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.