Difference Between 2002 WR and YZ Suspension



No replies to this topic
  • Master_Blaster

Posted April 17, 2002 - 03:27 AM

#1

My 2002 WR426 is excellent for Enduros but is a bit too soft for MX. Does anybody know what the difference between the WR and YZ suspension is, and what I would have to do to get it to YZ spec.

I have played with settings and have found that ironically it is better for MX with less oil in the forks but with more damping.

My current settings are:
Rider 170lbs without gear.
Fork springs 0.42 (Euro Std)
Oil level 120mm
Compression 8 out
Rebound 9 out

Rear Spring 5.00 (Euro Std)
Compression Bolt 1.5 out
Comp screw 12 out
Rebound 12 out.

Who has tried or knows what?? :)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.