needle help

1 reply to this topic
  • bkmcguire

Posted April 16, 2002 - 09:39 PM


Ok I need some advice I have a 02 wr 426 yz timed, all the free mods what should my jetting be for the oregon coast (0-1000ft 50-70degrees) right now I am running stock jetting and have very little popping when it does pop it is in the midrange so I suppose it is my needle or clip position I would apricate the help also has anyone bought the M21 dot aproved tire and liked it?? :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jamracing

Posted April 16, 2002 - 11:06 AM


I went with the stock YZ250f needle in the middle position. It cleaned up the midrange completly. Of course, this was also in conjunction with changing the other jets.
The MT-21 is a dual sport tire, so if you do any serious off-roading, you won't like it very much.

[ April 16, 2002: Message edited by: jamracing ]


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.