Sexy in Black


10 replies to this topic
  • knuklehead

Posted February 06, 2008 - 09:59 AM

#1

Getting excited to ride the pig some.Just need to get my brake part's in and bolted on. Posted Image

  • jetfuel

Posted February 06, 2008 - 11:01 AM

#2

Looks Bad azz .. :busted:

  • martinfan30

Posted February 06, 2008 - 12:58 PM

#3

Nice ride KH!:busted:

  • hondacrf150f1

Posted February 06, 2008 - 01:06 PM

#4

I wasnt aware PC made a 496 system for the 650R. How is it?

  • hill5150

Posted February 06, 2008 - 01:14 PM

#5

Bike looks goood.........:busted:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • djones

Posted February 06, 2008 - 01:31 PM

#6

I wasnt aware PC made a 496 system for the 650R. How is it?


Mine came with a 496 on it. I haven't rode the BRP with out it, so I don't have anything to compare it to, but the previous owner who put the pipe on said it was comparable to the stock can w/ the HRC open tip. He thought the 496 was a little quieter and definitely lighter.
Id say it makes good power and isnt too loud. I might try swapping on the stock can this summer just compare.

  • Frank ZX

Posted February 06, 2008 - 01:33 PM

#7

Looks great!If thats a aluminum tank,where did you get it?

  • cj650

Posted February 06, 2008 - 01:34 PM

#8

i want that body kit!!!

  • knuklehead

Posted February 06, 2008 - 03:11 PM

#9

Tank/shroud's at www.blitalia.com,the front fender I can't think of where I got it,(found it reading thread's here)The 496 is quite but it kill's a little on top compared to the T4. I realy like what the little tank does to the feel of the bike you can almost forget how big it is.

  • Maroast

Posted February 06, 2008 - 03:15 PM

#10

lookin good man! are you running the stock hubs on those motard wheels? If you are, did you lace them yourself?

  • knuklehead

Posted February 06, 2008 - 03:23 PM

#11

Stock 650 rear and stock crf front,orginaly the rim's I lace'd up on L hub's when I owend one,when I bought the R, I just order a set of hub's and bucanne's spoke's and relaced to fit the R ,than had to do the front again to the crf hub





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.