Supermoto Wheels with Cush Drive


5 replies to this topic
  • Appalachian DR

Posted February 05, 2008 - 04:00 AM

#1

I'm looking for any leads to a source for 17"s for the 03 WR with a cush hub.

Thanks

  • tweav

Posted February 05, 2008 - 04:06 AM

#2

call these guy's they can hook you up , with whatever you need as far as supermoto stuff goes.

http://www.factorypr...g.com/index.htm

  • Appalachian DR

Posted February 05, 2008 - 12:35 PM

#3

call these guy's they can hook you up , with whatever you need as far as supermoto stuff goes.

http://www.factorypr...g.com/index.htm


They only list hubs and wheels for the YZ.

Does the YZ and WR use the same wheel?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tweav

Posted February 05, 2008 - 01:02 PM

#4

They only list hubs and wheels for the YZ.

Does the YZ and WR use the same wheel?



the yz and the wr share the same rear hub . the front hub on a wr has two tabs that drive your stock odometer/speedometer , other then that the hub is the same . you can ether have your front hub relaced , or what most people do is just pop on a aftermarket computer like a vapor .
So yes yz stuff fits mostly . I don't think any aftermarket front hub has the two tabs .

  • MaxPower

Posted February 06, 2008 - 01:37 AM

#5

[COLOR="Green"]I read that a clutch basket from a 450 quad will fit these bikes.That has to absorb some of the road shock instead of using a cush hub. They have a spring dampening set up in the big gear behind the basket. I bought one but havent installed it yet.[/COLOR]

  • tweav

Posted February 06, 2008 - 09:51 AM

#6

[COLOR="Green"]I read that a clutch basket from a 450 quad will fit these bikes.That has to absorb some of the road shock instead of using a cush hub. They have a spring dampening set up in the big gear behind the basket. I bought one but havent installed it yet.[/COLOR]


ok here is some links to gytr parts , they don't say anything about a damper. but they are not the same looking at the pics. by the looks of it you need something in the middle of the 4 wheeler one to make it work

wr 450f

http://www.yamaha-mo...0/0/detail.aspx


yfz450

http://www.yamaha-mo...0/0/detail.aspx




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.