yz426 jd jet kit awsome

6 replies to this topic
  • BRYANS01

Posted February 02, 2008 - 08:02 PM


well just put the jd jetting into my 01 426 and i must say its great cant belive the difference no more bog better broader power and starts first kick hot or cold. Also put in zipty air screw and that makes dialing in so much easier. Just want to thank all of you for your input in this forum without that i would have never even known about these products.:busted:

  • 02WR426Cali

Posted February 03, 2008 - 11:01 AM


Yeah I totally agree, the kit makes a huge difference. I don't know if it would do much on a dyno but who cares, it's the seat of the pants dyno that matters. I also went one size bigger on the pilot jet which makes it run better, but when it's hot it doesn't start on the first kick all the time like it used to. But that's ok it still starts within a couple kicks and runs better down low while I'm riding

  • spc mike

Posted February 11, 2008 - 06:30 PM


bryan, where did you end up getting your kit from?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Speedracer747-400

Posted February 11, 2008 - 07:24 PM


The TT store sells them.


  • spc mike

Posted February 11, 2008 - 07:39 PM


... that was a dumb question because i guess you can only get them here....:applause:

  • 02WR426Cali

Posted February 11, 2008 - 09:52 PM


I got mine from Cyclegear. They have them in stock!

  • BRYANS01

Posted February 12, 2008 - 09:26 AM


i got it at the tt store with the 10% discount

Related Content


Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

YZ450F 03 Sparks driving me crazy by SirAttard

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.