coldweld



No replies to this topic
  • Taffy

Posted April 14, 2002 - 12:41 PM

#1

you've got your PM set up NOT to take PM's.

the 15/50 worked in that it kept the revs low and yet when i green-laned the bike was spot on for fast work.

but don't forget that the jetting was spot on. if your going to have tall gearing it's got to be able to pull.

i went back to 14/48 for the enduro's near the end because i wanted the bike to drop into corners and lift when i dabbed the throttle.

i've only been dirt riding for 24 months so i went up a few blind alleys. i would thoroughly recommend the set up for trail and green laning.

Taffy




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.