98 YZ250 Torque Specs?


No replies to this topic
  • BrokenR1

Posted January 30, 2008 - 07:36 AM

#1

I finally got around to changing the main jet as it was fouling plugs daily. While stuff was off we opened the top to check out the piston and cylinder. It still appears to be the original stuff with hardly any scoring so I'm leaving it alone. Reeds are still good also. So now I need to tighten everything up and am just wondering a couple things.

First can anyone tell me what torque thos nuts on top of the engine to?
And second what is the reccomened height for the floats in the carb?

I moved them from 5mm to 6mm after I found something similar regarding a 99 YZ. After everything is back together I can tune it up and hopefully won't have all the spooge coming out and a plug will last a while.

Thanks





Related Content

Forums
Photo

Favorite vintage dirt bikes by ToadilyInsane


Dirt Bike   Special Interest Forums   Vintage
  • Hot  46 replies
Forums
Photo

YZ 125 fouling plugs fast! by bustech17


Dirt Bike   Dirt Bike Technical Forums   Intake - Jetting / Fuel Injection
  • Hot  31 replies
Forums
Photo

KP Racing Metering block - Dyno Results by CamP


Dirt Bike   Make / Model Specific   Honda   Honda 2-Stroke
  • Hot  196 replies
Forums
Photo

2001 yz250 will only bump start by Dirtshark808


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • Hot  32 replies
Forums
Photo

05 YZ 250 Build by Moto_Ty


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • Hot  172 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.