xr600 killswitch

2 replies to this topic
  • frisco

Posted January 25, 2008 - 09:17 PM


I bought my first bike in november - 1995 xr600r. The problem is, the bike came without a killswitch. I bought one from chaparral-racing, I also got a baja designs key ignition. The question is - how to install this? There are 3 wires - black/white, blue and green. Green and blue are connected to the headlight.
I hope somebody can help me.
Thanks, Chris

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cleonard

Posted January 26, 2008 - 10:30 AM


First Welcome to ThumperTalk. It's the best place for questions like this.

The black/white wire is the kill switch. It is open for run. To stop the engine it is connected to the frame or the green wire. The ignition switch and the kill switch will both need to be connected to that black/white wire.

  • frisco

Posted January 26, 2008 - 11:43 PM


Thank You:)

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.