R&D Power Bowl Update


No replies to this topic
  • scottsyz

Posted January 22, 2008 - 12:10 PM

#1

Raced my "07" YZ 450F this past weekend at Glen Helen and just wanted to share my views on the R&D Power Bowl. After an hour of racing my bike was running flawlessly. We used two (2) of the biggest hills out there (we went all the way to the top of Yamaha Hill, past the water tower) and my 450 NEVER skipped a beat !! It is reassuring to know that when you reach the tops of these hills and shut off that the bike does not stall. Maybe if Chad Reed had one of these (Anaheim 1) his bike wouldn't have stalled while leading the main ?? About halfway through the race I dropped my bike in a corner and killed it. I picked it up, found nuetral and it (was hot) started on the second kick !!! Can't wait to see what R&D comes up with next !!! Also, try the "08" 450 pegs on your "07" as they are wider and I believe they have a little more angle on them.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.